Jabra Evolve2 85 desk stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jabra Evolve2 85 desk stand re-styled as Warhammer 40k mechanicus with Legio Cybernetica woth charging pins
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3D-printed charging stand for the Jabra Evolve2 85 headset, styled after the Adeptus Mechanicus. One ear cup rests in a tilted dish, and two spring-loaded pogo pins in the dish floor charge the headset. Power comes in through a USB-C port at the back. The base has cog teeth, rivets, vent slots, riveted arm rails and a Legio Cybernetica emblem engraved in the dish. The stand measures 109 × 78 × 39 mm and is designed to print in PETG without supports.
Parts used
1 × printed stand base
1 × printed bottom cover. It holds the USB-C board and closes the electronics bay.
2 × pogo pins, Shenzhen QH Industrial 101210001 (16.2 mm, 2 mm barrel, 3 mm flange, 2.5 mm stroke)
1 × USB-C PD trigger board, photo attached
3 × M2 countersunk self-tapping screws, 8–10 mm
Hook-up wire to connect the board to the pins
Right pin: -
Left pin: +
Consumption: 5v - 0.4 amp