Jabra Evolve2 85 desk stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Jabra Evolve2 85 desk stand re-styled as Warhammer 40k mechanicus with Legio Cybernetica woth charging pins
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3D-printed charging stand for the Jabra Evolve2 85 headset, styled after the Adeptus Mechanicus. One ear cup rests in a tilted dish, and two spring-loaded pogo pins in the dish floor charge the headset. Power comes in through a USB-C port at the back. The base has cog teeth, rivets, vent slots, riveted arm rails and a Legio Cybernetica emblem engraved in the dish. The stand measures 109 × 78 × 39 mm and is designed to print in PETG without supports.
Parts used
1 × printed stand base
1 × printed bottom cover. It holds the USB-C board and closes the electronics bay.
2 × pogo pins, Shenzhen QH Industrial 101210001 (16.2 mm, 2 mm barrel, 3 mm flange, 2.5 mm stroke)
1 × USB-C PD trigger board, photo attached
3 × M2 countersunk self-tapping screws, 8–10 mm
Hook-up wire to connect the board to the pins
Right pin: -
Left pin: +
Consumption: 5v - 0.4 amp