1 / 1
Gridfinity Holder for the Ignite Mini Lighter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity Holder for the Ignite Mini Lighter
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 3
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
2x2 Gridfinity holder for the Ignite Mini lighter.
It has a hex pocket for the base, 52 mm across the flats, and it's 30 mm deep so the lighter stands up and doesn't tip over. My first one was only 11 mm deep and the lighter kept falling over.
6 units tall. Printed in PLA at 0.3 mm with no supports.
Built on the Gridfinity system by Zack Freedman (gridfinity.xyz).
