CoralScope: Edge-AI Vision Station : CoralBoard Cases & Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CoralScope: Edge-AI Vision Station : Modular Computer-Vision Enclosure with Articulating Camera Mast & Dual Desktop/VESA
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Coralboard case and mount.
CoralScope: Edge-AI Vision Station : Modular Computer-Vision Enclosure with Articulating Camera Mast & Dual Desktop/VESA
Hardware Bill of Materials (BOM)
Sub-Assembly | Fastener / Hardware | Size / Pitch | Qty | Purpose |
|---|---|---|---|---|
Chassis Board Mount | M3 Socket / Button Head | M3 × 6 mm (or 8 mm) | 4 | Secures CoralBoard down to standoffs |
Chassis Nut Traps | M3 Hex Nut (DIN 934) | 5.5 mm AF, 2.4 mm thick | 4 | Press-fit into chassis floor hex recesses |
Arm & Turret Hinges | M3 Socket / Button Head | M3 × 20 mm (or 22 mm) | 2 | 1x Lower stand pivot, 1x Upper camera pivot |
Hinge Tension Traps | M3 Hex Nut / Locknut | DIN 934 / Nyloc | 2 | Captive in clevis ear hexagonal pockets |
Camera Module Mount | M2 Self-tapping / Machine | M2 × 4 mm (or 5 mm) | 4 | Secures 25×24 mm MIPI camera module |
(Optional) Active Cooling | 5V DC Axial Fan | 30 × 30 × 10 mm (3010) | 1 | Drops onto lid over SoC (24 mm hole pitch) |
(Optional) Fan Screws | M3 Button / Socket Head | M3 × 12 mm + M3 Nuts | 4 | Fastens cooling fan through lid |
(Optional) VESA Mount | M4 Machine Screws | M4 × 10 mm | 4 | For standard 75×75 mm VESA monitor arms |
(Optional) Desktop Feet | Rubber / Silicone Bumpers | Ø 8–10 mm stick-on | 4 | Non-slip feet under desktop base corners |
2. Recommended Slicer & 3D Print Settings
Filament: PETG (recommended for thermal resistance near the SoC & Coral NPU), or PLA+ / ABS / ASA.
Layer Height: 0.20 mm (or 0.16 mm for ultra-smooth hinge knuckles).
Walls / Perimeters: 4 walls (~1.6 mm) for solid screw bosses and clevis hinge ears.
Top / Bottom Solid Layers: 4 bottom / 5 top.
Infill: 20% – 25% (Gyroid or Grid).
Supports: 0% (100% Support-Free) — every model is engineered with self-supporting chamfers and flat resting surfaces.
3. Assembly Sequence Summary
Chassis Prep: Press 4x M3 nuts into the bottom pockets of
Coralboard_Base_Chassis.Board Drop-In: Slide the CoralBoard SL into the chassis cavity and fasten with 4x M3 × 6 mm screws into the standoffs.
Camera Head: Mount your 25×24 mm MIPI CSI camera module into the rear cavity using 4x M2 screws; connect the ribbon cable out through the bottom slot.
Articulating Arm: Press captive M3 nuts into the clevis pockets on the stand and arm; link the joints with 2x M3 × 20 mm bolts and set friction tension.
Dock & Close: Slide the chassis dovetail into the stand dock, plug the camera ribbon into the board's CSI slot, and snap
Coralboard_Top_Lidin place.