Liczymy pasujące modele…
TrackVision - The Open Railway Project Welcome to the TrackVision ecosystem! This is a comprehensive, custom-designed model railway project built from the ground up for makers. It features a unique, non-standard scale engineered…
Canopy for Hikvision DS-1258ZJ WM110 camera holder. Protect the camera from rain and keep it clean to prevent poor view
Adapters that slide over the arms of an Apple Vision Pro to enable the attachment of a second Dual Solo strap. The arms have to be detached from the body using the special pin that was shipped with the AVP. I printed the adapters…
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
There were similar rack mounts for NVRs but not for my Hikvision DS-7104NI-Q1/4P/M. Dimensions: 265 × 223 × 48 mm The weight of the machine is not that much, therefore the front support is enough. Print with face down for nicer finish.…
This custom-designed accessory serves as an alternative to the original Light Seal on the Apple Vision Pro. It allows the headset to be used without the default facial gasket, offering a more open experience that’s especially useful for…
Experience a captivating blend of retro design and futuristic technology with this 3D printable STL model of the Hyundai N Vision 74. This sports car model is perfect for automotive enthusiasts and concept car admirers looking to showcase…
It was created for and is compatible with the Hikvision DS-KH6320-WTE1 model, which is a KH6 Series IP-Based Indoor Station.It was created for and is compatible with the Hikvision DS-KH6320-WTE1 model, which is a KH6 Series IP-Based…
Filament - PLA Color Changing, Silk Layer Height - 0.3 mm Perimeters - 3 Infill - 15% Gyroid Supports - Definitely NOTE: Joint was intentionally made tight (0.15 mm clearance per side). You may need plyers to fully seat it.
update v2: ear cups holder updated, print in one piece no need assembly. I made a custom headband for over-ear headphones (I did these for the omega dms open-source headphones) using an Apple Vision Pro knit band, a set of thin blank…
PVS-31A Night Vision Specs Adjustable you can use the supplied printed rods to attach the lenses or use a long bolt and nut. Use HollowSpecs. For hollowed out lenses. (you can see through them)
Simple and cute quick printing case for the Heltec E213 eInk node. There's even a little room for a battery if you're so inclined. Whipped this together for my desk and though I would share if anyone else with the same node wants it...…
This is a small retro TV that is meant to be displayed on a desk, shelf, or anywhere you please. This retro TV comes apart into the actual TV and the legs. The legs slide into the slot on the bottom of the retro T.V. I recommend using…
This is my take on the mn rebel alliance. There are lots of similar models and logos out there. I wanted bigger laser eyes and the North Star so I used tinkercad and used some .svg files created in vcs. I attached the .stl for those of us…
This desk holder is designed for the Nano Polymer Adhesive by Vision Miner , keeping the bottle and brush secure, organized, and always within reach . The integrated brush holder prevents mess and keeps your workspace clean. A compact and…
Simple holder to hold a Heltec visionmaster E290 for a project called TESLA Meshtastic.
A mostly decorative case i made to make use of the larger screen of the T190 Assembly can be a bit tricky, but you'll get there with some cursing and successive retries. There are a few flaws with the design. I'm including STEP files if…
Monture de remplacement pour Mantis Elite Version 2 Reference fabriquant 202-B0445 Vision Engineering Cette pièce est une substitution au modèle d'origine. Paramètres d’impression 3D : Impression facile avec support (voir images), en PETG…
A simple tactical helmet that will fit onto a cat's noggin. I have included night vision goggles, a stand, and two versions of the helmet (with and without picatinny rails). It also has slots for a chin strap (but please don't strap this…
Just a simple multicolor coaster (non multicolor version coming soon)
This is a counter weight jig for 2025-2026 Science Olympiad Machines event, useful for actively adjusting the position of a counter weight for a machine. This object does need supports. Height is 9.4 cm, width is 2.5 cm, length is 5.5 cm
Sometimes it is simply necessary to increase the mounting angle of the Switchbot Keypad Vision. Especially in narrow entrances, mounting in the reveal is necessary, but this results in a poor angle for the keypad. With my adapters, you…
How to print: Print 2x with one mirrored!!! (not necessary with v4) Print laying down flat Print solid Print with build plate supports Assembly: Remove the 2 screws holding the pimax dream air headstrap bracket on Remove the bracket and…
Best in nylon for the threads, especially the internal threads for 2" filter
The siren rotor but revised, revision of the revision. Also, when I mean AI-assisted, I just did research on ChatGPT to see how loud it would be with the other assembly and tell me how big the gap is (gap from outside the rotor/chopper…
I built this thing so i can use my Vision Pro without the need for pockets. It can be worn like a chest-strap or pretty much anywhere on your waist. I'm using 2.5mm diameter elastic cord to keep the two case-halves together and 30mm wide…
Vision Master E213 ESP32-S3R8 LoRa Development Board SX1262 Chip with 2.13" E-Ink Display LoRaWAN BLE 5.0 WiFi Compatible with Arduino LoRa Meshtastic IoT（902-928MHz). I was looking for a case for the Heltec E-213 Vision Master that was…
Three different generic caboose interiors that fit in HO scale caboose kits similar to those made by Athearn. This model will print in 3 parts, the ends are inserted on top of the steel weight on the floor while the center cupola section…
Generic Ho scale interior designed to fit into AHM brand extended vision cabooses. Not a complete interior only the cupola. to install: Remove cupola roof and drop into model (if model has "glass" installed may have to trim glass sprue to…
Universal mount for DJI O4 air unit with camera and antennas. It is designed for mount on stack 30,5 x 30,5 with M3 screws. Camera angle is 40-50°. Designed for five inch X frame with no props in view. Next version has bigger angle range…
The Visionary — Buste 🇫🇷 Description Ce buste intitulé “The Visionary” représente une figure intemporelle tournée vers l’avenir, incarnant la pensée, la créativité et l’émergence des idées. Inspiré des codes classiques de la sculpture, le…
Corporal of the 2nd Division, Balakhovich Detachment, 1919 Category: People
A hinged camera cover for the Hikvision facial recognition camera model DS-K1T342DWX. Created because one of our cameras is pointed straight at one of our technician's desk, and no one likes being watched like that. This cover, though not…
Only the Front left one from @Mongrel worked for me so I modified the others for newer revisions. My Elegoo CC is from November. If there is a way to see what revision my CC is feel free to tell me and I will post it.
Infill: 30% Paredes: 3 linhas Altura de camada: 0,2 mm Cor: Preta
There are also other versions of the power supply — their cover mounting differs. Since I couldn’t find an exact match for this model, I drew it myself.
If you've seen my other work , you know I like providing options for us and our prints. I did the quad tube night vision goggles, but had an ask for binocular versions. Done. Then I said, might as well do a monocular version too! All…
Camera mount for Hikvision HWI-D150HA with and without raincover STEP Files included Required Hardware for Mounting: 3 x M3 Heat Inserts 2 x M8 Screws for wall mounting Print & Material Settings: No Supports needed Material: ABS or ABS+…
🇫🇷 [FR] Studio 3D Figurine & Kitbash Tool Transformez votre navigateur en un véritable studio de préparation. Cet outil "couteau suisse" est conçu spécifiquement pour les passionnés d'impression 3D et les peintres de figurines.…
Buy the Full Vision kit I've teamed up with VOXELPLA to make a kit that includes acrylic panels, printed parts, screws, and tool. The magnets and threaded inserts are pre-installed, so you won't need anything outside of the kit. Shipping…
Haptic model for the visually impaired, based on the book " Kamil – malíř snů " by Markéta Vítková. Read more about the project on PrusaLab's blog .
This is a 1x1x40 with 4 subdevisions I made for Alexandre Chappel's 55mm storage grid system ModuBOX. The Collet holder is based on the 40mm stackable model and can be used on top of a 1x1 sized 40mm box. This model is designed to contain…
This is a 1x1x40 with 2 subdevisions I made for Alexandre Chappel's 55mm storage grid system ModuBOX. The Collet holder is based on the 40mm stackable model and can be used on top of a 1x1 sized 40mm box. This model is designed to contain…
Important! This is a remix version of Perfect Fit Bambu Lab/Bambulab AMS Feeder Button Cover Protector for the new revision of AMS feeding funnel . There are several reports that such AMS units arrived to users from 08.2023 . Please check…
Storage trays for game counters. Designed to fit 2 side by side in a normal wargame box in the same space normally used for one commercially available counter tray (GMT, Aegis, etc.). Lid tucks in under the box when in use. Counters shown…
A simple homemade belt-loop holster for the Apple Vision Pro battery pack , to help save you $50 after spending $3500+. Note: see also my newer design (in “beta” pending final tweaks). It features a rotating clip and sleeker design. The…
The Vision Pro is a bit unbalanced when wearing it for long stretches, so by adding the battery pack to the back it feels more balances and reduces the perceived weight on your face. it's also handy for being able to move without worrying…
It's asymmetrical, so you'll have to flip the model in your slicer to print both halves. To install, remove the arms of the Vision Pro with a sim eject tool or paperclip and slide it on. The eject hole is covered by the light shield.…
I use this cap to protect the ZEISS lens inserts. I printed the cap once for one lens and then mirror flipped it and printed again for the second lens. I used soft TPU plastic
I kept picking up my AVP and getting finger prints all over my Zeiss Lens inserts by accident, so I decided to design removable covers to prevent this. The cover is interchangeable between the left and right lens, so print two of them to…
Meta Quest 2 Version! This adapter allows you to use Apple's Vision Pro headbands on your Meta Quest 2. Note: Best results if printed with PETG (Not PLA) Don't have a printer? You can purchase a professionally printed version on the the…
Ideal for measuring board game-related things. If you want to multi-material print, you will need to set the materials manually in your before printing. Attached SCAD has colors set up in the script, so you might be able to automate it…
Completely transparent cover for Nextruder. It does not use the plastic ring. After more than three month testing is working without issues. Use clear PETG filament or stronger. I have used a resin printer (first picture) and clear PCTG…
Celebrate Eurovision with this stylish lightbox featuring the Luxembourg logo. Perfect for Eurovision fans, this design adds a vibrant and festive touch to any space. Easy to print and assemble, it’s an eye-catching addition to your…
My take on a version of Othello/Reversi specifically designed for the vision impaired (good for the unimpaired too!). The pieces are designed to have a 1/8" thick by ¾" diameter steel fender washer embedded in each. The board is designed…
Includes three variants of the lid: PicoVision text + button labels Plain with no text or labels Multi-material text + button labels … and two variants of the lower case (with/without debug/IO hole) Lower half needs supports for the screw…
Print the template to be able to make Braille language. Remember to write in the opposite direction, for punching. Then you will be able to read correctly the Braille dots on the back. Thank you, for helping all the people who have this…
in the photo are previous versions of the models, I modified them a little so that the LED backlight would probably fit in its place. Please note that the hole for the nut was 7 millimeters, although the model has 8. I think that the nut…
With balljoint for adjustability. Case fits a GXIVISION IMX298 USB Webcam but can be redesigned.
Easy to print and install. Print using PETG so it has some flex when installing. You won't need to remove the arms to install. Just attach the back part first and snap the front clips over the arms. Printed on MK4 White Pollymaker PETG…
Thanks to the original designer of this tool. I use it but it flexes at the handle, I fixed that.
Stable table holder for the Hikvision video display station display. Easy installation metal bracket for 3 screws 3.0-3.2x10-15 mm. Printing PETG ABAFLEX.cz on Bambulab A1. No supports. Cable outlet from the back of the stand.
Give a broken Boavision HD22M102M security camera a new life! Boavision MODEL:HD22M102M suffers from one potentially fatal flaw. The wiring inside can shear due to the bad way strain relief is implemented: a piece of helical teflon tubing…
Redesigned it from an old .stl download. Cut it into half to fit only 1 night vision lens. Made the cable easy access It will fit in a 8.1mm ball holder
The Rough Plan: A matrix display with a Raspberry Pi that we can control over Wi-Fi with our own C# program. Accurate execution: First Versions: The big problem with this project was that we had completely miscalculated how to do the…
My print settings: PETG 100 infill 0.2 layers Flat side down with support
Kryt pro modul kamery na Mammotion Yuka. Perfektne sedi a drzi. Doporucuji vytisknout z materialu odolneho UV. Material na fotce je Prusament PC CF. ------------------------------------ Cover for the camera module on Mammotion Yuka. It…
Simple case for Night Vision Camera compatible with Raspberry Pi. Fits larger cameras and designed to be compatible with mount from Raspberry Pi Night Vision Camera Mount (incl. Infrared spots) by Bravehartk2 | Download free STL model |…
Umbrella Corporation - Security Division, Raccoon City, License Plate Frame, Resident Evil Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
YOUR GRANDPARENTS WERE ASKED TO FIGHT A WORLD WAR. YOU'RE BEING ASKED TO STAY HOME AND WATCH TELEVISION. DON'T SCREW THIS ! Stay safe friends and I will see you all on the other side of this. Category: Signs & Logos
I previously mounted my cameras directly to walls and posts and wanted to both clean up the wiring as well as get a better viewing angle that was not obstructed. As well, many of the existing designs have a flat top for easy printing but…
I present you my self-designed Hikvision dome camera box. I wanted a way to place my Hikvision camera behind the glass. My camera is the Hikvision DS-2CD2347G2-LU, but I think it will fit other camera's aswell! I printed in 0.3mm…
Disclaimer: These and other models are available to all "my club" members starting at $5 per month, as well as for one-time purchase. Your support helps sustain the development efforts and the acquisition of modules. Thank you very much!…
This is a remix from the original with no divisions on the inside. Also, this is bigger compared to others. Print Settings Printer Brand: QIDI Printer: I-Mates **Supports:** Yes Resolution: 0.2 **Infill:** 15 Filament: SunLu Silk PLA…
This addon for the IKEA ORDNING Cutlery Stand is designed to help organize your silverware, There are two sections of different heights for smaller cutlery, like coffee spoons (see photo for reference), but please note the following:…
Description: Apple Vision Pro comes with two bands, which need to be fastened tightly and might cause discomfort after a few hours. I designed this headset supporter to improve balance and reduce facial discomfort. The majority of the…
For the case you will need 4 M3Bolts (2x 20mm long and 2x 10mm long). There is a top plate for every screw type of your choosing. There are two bottom half variations. One blank and one with a loop for a lanyard or strap to fit through.…
Elta VISION PRO trunk montage adaptor for Mercedes Vito, no screws, just slide to trunk bar. Fits when trunk bar size is 34mm x 22.2mm (width x height), maybe fits to other bar trunks but i use this in my Vito W639
Custom 3D Printed Carrying Case for OttLite Travel LED Task Lamp Description: This custom-designed 3D printed carrying case is the perfect travel companion for your OttLite Travel LED Task Lamp (Cordless, with Digital Display & Touch…
Canopy for Hikvision DS-1258ZJ WM110 camera holder. Protect the camera from rain and keep it clean to prevent poor view
Just a stand for my Scuf Envision Pro. I couldn't find any online. I made it so there is a gap to see if the LED's are still on and to not accidentally press the buttons when you put it down. I printed mine with a 0.6mm nozzle, on it's…
Print in PETG at 0.2 layer height 25% infill 3 outer walls organic supports on bed only works great.
!["Athearn" wide vision caboose complete interior (HO scale 1:87)[multi]](https://media.printables.com/media/prints/a0b971e0-dee1-479f-bb0d-b63d89088f7d/images/12394114_7fd6edcb-890c-49b2-9dd3-f189a2ad4f0a_c8eef5e9-7c13-4f07-aba7-c54819a329cf/img_20260323_121724593.jpg)
![[ALCH] 1x1x40 4 subdevisions ModuBOX](https://media.printables.com/media/prints/533850/images/4308033_73ffa9c5-c6e8-42e9-b29a-f8ca1baa1b67/img_0498.jpeg)
![[ALCH] 1x1x40 2 subdevisions ModuBOX](https://media.printables.com/media/prints/533851/images/4308035_923a67a9-f9db-4091-9022-416738440c4f/img_0497.jpeg)
