Black Panther Revision 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi Corey, I've done all I can to refine the detail.
- Ocena
- 0 / 5
- Polubienia
- 74
- Pobrania
- 471
- Wydruki
- 0
- Wyświetlenia
- 2321
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Masks
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi Corey, I've done all I can to refine the detail. Not the easiest of projects but hopefully it works for you now, Cheers Jace.
Please note original file can be found over here also
https://www.pepakura.eu/black-panther-civil-war-helmet/
Please note Parts 7A,B,C,D are optional part sizes to fit a 200x200 Bed
A big thanks to Delbane Ren for printing this model and displaying it on Youtube, Cheers Jace
PPS As a special request I have created a Gcode for a CR10 for the complete helmet which will take 90hours to print and 1090gms of PLA filament. (so you will need to change a roll at some point. (see Simplify Gcode pic attached ) Now I wouldnt print a helmet like this my self. But for those of you who wish to try. Heres the code "no gauarantees it will work, but good luck : ) Cheers Jace