1 / 4
Enclosure for 2.0 Inch LCD Display, 240x320 TFT Screen, — zdjęcie 1
1 / 4

Enclosure for 2.0 Inch LCD Display, 240x320 TFT Screen,

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Standalone Enclosure

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
35
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Angled enclosure for the NULLLAB SWIFT-LCD-20 V1.0, a 2.0” ST7789 SPI display with 240 × 320 resolution, mounted in landscape orientation.

Designed for my ESP32-based chicken brooder controller, but suitable for other projects using the same display module.

Features:

  • Two-piece design with a removable front panel.

  • Angled face for convenient viewing.

  • Beveled display opening for a clean, recessed appearance.

  • Internal display mounting using the module’s two mounting holes, plus a retaining lip on the opposite end.

  • Four screw locations securing the front panel to the enclosure.

  • Mounting tabs for attaching the enclosure to a flat surface.

  • Mostly open bottom for cable routing and access.

The front panel is 3 mm thick, and the enclosure walls are 2 mm thick.

The enclosure has been printed, assembled, and tested with the actual display shown in the photos. Display, electronics, and screws are not included.