Enclosure for 2.0 Inch LCD Display, 240x320 TFT Screen,
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Standalone Enclosure
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Angled enclosure for the NULLLAB SWIFT-LCD-20 V1.0, a 2.0” ST7789 SPI display with 240 × 320 resolution, mounted in landscape orientation.
Designed for my ESP32-based chicken brooder controller, but suitable for other projects using the same display module.
Features:
Two-piece design with a removable front panel.
Angled face for convenient viewing.
Beveled display opening for a clean, recessed appearance.
Internal display mounting using the module’s two mounting holes, plus a retaining lip on the opposite end.
Four screw locations securing the front panel to the enclosure.
Mounting tabs for attaching the enclosure to a flat surface.
Mostly open bottom for cable routing and access.
The front panel is 3 mm thick, and the enclosure walls are 2 mm thick.
The enclosure has been printed, assembled, and tested with the actual display shown in the photos. Display, electronics, and screws are not included.
