DJBB Maggie (Passive Magloop Antenna for Sound Design & Field Recording)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple device to let you listen to EM waves around you. Similar to Priezor LOM.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 461
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- GNU General Public License v2.0
Full Build Guide here on djbajablast.com
I wanted a device like the Priezor LOM that is 3d printable, affordable, and most importantly, available (the LOM is out of stock)
I print in PETG with a 0.6 nozzle, which takes ~70 minutes with my stock Prusa Mini+.
Basically, print the parts, insert the audio jack with a couple of wires pre-soldered to it, Then use M3 screws n nuts to put it together. Wrap your magnet wire around it as many times as you please (shoot for at least 100, probably?), then solder each end to to the aux jack wires.