1 / 2
Trailer lashing buttons / Kolík na uchycení plachty na přívěs — zdjęcie 1
1 / 2

Trailer lashing buttons / Kolík na uchycení plachty na přívěs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a lashing button for a trailer tarp, meant to be riveted/screwed in place by a 4mm rivet/screw.

Ocena
5 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
8
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

I needed to replace a tarp lashing button on my trailer since the top part broke off. I didn't want to order an expensive replacement, so I made one on my printer.

The model was generated with the help of claude.

I have two variants - one close to the original and one with a raised bottom part, since that was what fitted my trailer better because of some additional plate that reinforces a part of it.

Dimensions (I matched those to a Bockmann trailer that I was fixing):

  • 25mm diameter

  • 4mm rivet

  • 15mm total height (short variant)

  • 16.5mm height (raised variant)

The raised variant has a 4mm lip, the regular one has 2,5mm.

Printed in PETG, 0,6 nozzle, 0,35 layer height.

My printed variant and the original one in the photos.

Tagi