Trailer lashing buttons / Kolík na uchycení plachty na přívěs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a lashing button for a trailer tarp, meant to be riveted/screwed in place by a 4mm rivet/screw.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 8
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
I needed to replace a tarp lashing button on my trailer since the top part broke off. I didn't want to order an expensive replacement, so I made one on my printer.
The model was generated with the help of claude.
I have two variants - one close to the original and one with a raised bottom part, since that was what fitted my trailer better because of some additional plate that reinforces a part of it.
Dimensions (I matched those to a Bockmann trailer that I was fixing):
25mm diameter
4mm rivet
15mm total height (short variant)
16.5mm height (raised variant)
The raised variant has a 4mm lip, the regular one has 2,5mm.
Printed in PETG, 0,6 nozzle, 0,35 layer height.
My printed variant and the original one in the photos.
