Ikea skådis Nightingale / Angled Talon magazine holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nightingale / Angled Talon magazine holder for Ikea skådis
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Nightingale / Angled Talon magazine holder for ikea skådis pegboard.
Comes in 4 variants 3, 4, 5 or 6 mags
This model was based on Am0nal's design. I did remodel it completely so it is not exactly the same dimensions, for instance this is a bit shorter and the nightingale mags are thinner as well.
Printing
I recommend using the 3mf files, there is one for orcaslicer and one for bambu slicer. There i have painted on supports where it is needed. However there are also stl files if you like to do it yourself. If you decide to use the stl files do remember to print 2 hooks per holder.

Assembly
Slide in the hooks on each end of the holder, they should go all the way in. The hook should be facing down see picture.
The hooks might be a tight fit, that is intentional so the holder doesn't rattle around.
