Gridfinity Dewalt Tstak base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Creation of a flat base with feet adjusted to the profile of a TSTAK II box (DWST17807).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Overview
I created this base from an existing grid template (thanks to Arizzle who made the grid ) that integrates with the shapes of the box. The base improves the recovery of small parts that can fall into the grid and the feet hug the bottom of the box for better support.
There are two types of feet. they measure 3mm or 8mm depending on the location.
The entire plate measures 42cm by 29.5cm. Its thickness is 1mm. this is sufficient because there are supports on the bottom of the box with the feet.
I printed the model in 4 parts (like the grid) and used glue to assemble.
Printing
Print in place without support.
nozzle : 0.4
filament : PLA/PETG
supports : no