Shimano GRX RX610 brifter double to triple chainring conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified internals to allow Shimano GRX RX610 brifters to work with triple front derailleurs
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
This modification allows Shimano GRX RX610 brifters(and possibly other Shimano 12 speed brifters) to shift MTB pull ratio triple front derailleurs, tested with Deore XT FD-M771.
Requires a strong material to handle the forces applied during shifting. I've used PA12-CF and it is holding up flawlessly with over 1000km of use so far. I've also tested PETG but it was not strong enough, breaking in less than 5 shifts.
The included part replaces the original ratchet, spool and nylon spacer.
Disassembly and reassembly of the brifter is a rather involved process and not to be taken lightly.
I suggest watching the following videos by "A Man With A Multitool" to get an idea of what the process looks like even though they are for 105 11 speed brifters and not exactly the same as the GRX RX610: disassembly and reassembly.
As an addendum, Shimano GRX RX610 rear brifters will shift 9 speed rear derailleurs without any modification. I've tested this with a Deore XT RD-M772.
