1 / 4
Modular Desk-Edge Clamp + Phone Clamp (FreeCAD parametric examples) — zdjęcie 1
1 / 4

Modular Desk-Edge Clamp + Phone Clamp (FreeCAD parametric examples)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Three FreeCAD parametric example parts: desk clamp, phone jaw, M5 plate. Unverified on hardware; example dimensions.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
10
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

FreeCAD parametric examples, unverified on hardware. All dimensions are example values.

A small modular mounting set for a desk edge and a phone (or similar thin device):

1. Desk-edge clamp — C-shaped screw-clamp body for an example desk thickness up to 30 mm, with a rear M5 mount face.

2. Phone clamp jaw — U-shaped jaw with an example clear opening of 70 mm (edit PHONE_W; documented example use range about 55–85 mm) and soft-pad recesses; rear M5 mount face.

3. M5 rail adapter — flat bridge plate with two M5 hole pairs to join the mount faces when a spacer helps.

M5 bolts / thumbscrews / nuts / washers and soft foam or rubber pads are buy-separately. No claim is made that these parts fit any commercial modular system.

Please note:

- These are FreeCAD parametric examples, unverified on hardware. They have not been printed or test-fitted by the author.

- Every dimension is an example value. Measure your desk and phone; edit the script parameters before using any output.

- No claims about strength, fit, or performance. Use at your own risk.

Tagi