Flush Cover for a Wall Outlet Box (64 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screw-on cover for a round in-wall outlet box, with a plaster-grip texture and a knock-out center.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
A cover that closes a round in-wall outlet box (European-style back box) and screws onto it. Useful when you want to:
turn the outlet box into a junction box;
hide the box when you don't need an outlet yet but may want one later;
remove an outlet without pulling out the cable and the box.
The front has a textured pattern so plaster/filler grips it and doesn't peel off. The center is a knock-out, in case you need to bring a cable out, e.g. for a heated towel rail or a cooker hood.
Cover diameter: 64 mm.
Files
SocketBoxCover_v2_Thicker.stl— recommended version. It is thicker, which fixes the cover flexing when plaster is applied.SocketBoxCover_v1.stl— first version.
Installation
Print the cover in PETG.
Knock out the center if you need a cable outlet.
Screw the cover to the outlet box through the notches on the edge.
Plaster over it; the texture holds the plaster.