KlipperScreen and Raspberry Pi 4b Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box for DFRobot 7" Touchscreen (DFR0678) and Raspberry Pi 4b with fan.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I upgraded my Prusa MK3s+ with a Raspberry Pi 4b running Klipper and a 7" DFRobot Touchscreen for KlipperScreen. I wanted the screen and Pi mounted outside of my enclosure, so my solution was a custom box with a 60mm fan to keep it all nice and cool. I threw a small heatsink of the SOC, which is probably overkill with that fan on there, but I had it laying around, so I slapped it on. There is a separate trim piece that snaps on the front once you've mounted the screen. This screen has an analog dimmer wheel on the top, that's what the small rectangular cutout is on the top of the box. It's pretty far recessed and not the easiest to get to, but I just adjusted it once and forgot about it, so it's fine for me. The 90-degree USB adapters go in the top USB2.0 and USB3.0 ports for the cable that connects to the printer as well as one for a toolboard if you choose to go that route. The power switch is on the CanaKit cable that slots into the notch in the USB cutout.
I included the STEP file and the Fusion file in case you want to modify it. I'm very new to this and I assure you my Fusion model is not optimized in any way, shape, or form, but if you can figure it out to modify, knock yourself out, just please give me credit if you happen to remix it.
Thanks for looking, and please post your makes!
Print settings:
OrcaSlicer
Prusament PETG Galaxy Black
0.3mm Quality preset
Manual support only on the top of the cutout on the back for the dimmer wheel
Bill of Materials:
DFRobot 7" 800x480 TFT DSI Capacitive Touchscreen (DFR0678)