1 / 5
5x7 Photo Frame — zdjęcie 1
1 / 5

5x7 Photo Frame

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a 5x7 photo frame you can 3D Print with stand works great

Ocena
5 / 5
Polubienia
21
Pobrania
154
Wydruki
2
Wyświetlenia
1173
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Public Domain

This is a 5x7 photo frame you can 3D Print with stand I have made 2 I gave one away with the kitten frame never took any pictures of it but it was vary cute

frame printed on a ender 3 v2 in PLA with a 0.4mm nozzle at 0.5mm line width 0.2 layer height in fill 15% zig zag 

back was printed at 0.5mm line width 0.2 layer height wall line count 5 or 6 no top or bottom layers infill 65-75% infill pattern Zig Zag this saves lot of time and some plastic since infill prints faster and back doesn't need to be solid you could also add 1 top layer for strength this adds almost 20 minutes to the print time

I printed Stand and hinge pin at 0.5mm line width 0.2 layer height wall line count 4 infill 15-20% zig zag 

I used needle nose pliers and lighter to heat staple and put it in the frame to hold the back on the frame it worked quite well but you need to be quick or the staple cools down to much

 This model will print with the default setting you use with your printer no supports are needed I was just using the setting I used to try to save time and plastic well getting a good quality print

Tagi