1 / 5
5x7 Photo Frame — image 1
1 / 5

5x7 Photo Frame

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a 5x7 photo frame you can 3D Print with stand works great

Rating
5 / 5
Likes
21
Downloads
154
Makes
2
Views
1,173
Reviews
1

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Public Domain

This is a 5x7 photo frame you can 3D Print with stand I have made 2 I gave one away with the kitten frame never took any pictures of it but it was vary cute

frame printed on a ender 3 v2 in PLA with a 0.4mm nozzle at 0.5mm line width 0.2 layer height in fill 15% zig zag 

back was printed at 0.5mm line width 0.2 layer height wall line count 5 or 6 no top or bottom layers infill 65-75% infill pattern Zig Zag this saves lot of time and some plastic since infill prints faster and back doesn't need to be solid you could also add 1 top layer for strength this adds almost 20 minutes to the print time

I printed Stand and hinge pin at 0.5mm line width 0.2 layer height wall line count 4 infill 15-20% zig zag 

I used needle nose pliers and lighter to heat staple and put it in the frame to hold the back on the frame it worked quite well but you need to be quick or the staple cools down to much

 This model will print with the default setting you use with your printer no supports are needed I was just using the setting I used to try to save time and plastic well getting a good quality print

Tags