iKTCH Exhaust manifold adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter was created to slot in the exhaust manifold in order to use generic ducting that wont interfere with flaps.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This adapter was created to slot in the exhaust manifold in order to use generic ducting. Their own duct has a unique straight edge and I didnt feel like climbing into the attic to swap my old one out. I was having trouble with the two manifold flaps opening and hitting the ducting and this design allows the clearance for the flaps to fully open. modeled for the IKP02-36, but might work for others that use the same manifold. This slots in perfectly to the manifold. 150.44mm OD, 145.06mm ID
Print small opening on the plate, wide opening facing up.
USE A FILAMENT THAT CAN WITHSTAND THE HEAT FOR YOUR USE-CASE
I am not responsible for any mishaps in material choice and potentially destroying your range hood. Use at your own risk.