1 / 1
Hexapod robot — zdjęcie 1

Hexapod robot

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A model of a hexapod robot.

Ocena
0 / 5
Polubienia
3
Pobrania
5
Wydruki
0
Wyświetlenia
48
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

Hexapod Robot (Created using fusion 360) — 18 DOF Walking Platform

Six-legged walking robot with three joints per leg (coxa, femur, tibia), each driven by its own hobby servo for 18 degrees of freedom total.

Electronics: an Arduino Mega 2560 as the main controller, with two PCA9685 16-channel PWM driver boards over I2C handling all 18 servo channels. Servos run off a separate power supply.

Firmware runs in two modes — inverse kinematics with a tripod gait and body pose control (translate, roll, pitch, yaw), and forward kinematics for direct joint jogging during calibration. Commanded over USB serial via keyboard (Can be found here:https://github.com/ryanchau20).

CAD includes the chassis plate, coxa/femur/tibia link brackets, and servo horn mounts.