1 / 1
Hexapod robot — image 1

Hexapod robot

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A model of a hexapod robot.

Rating
0 / 5
Likes
3
Downloads
5
Makes
0
Views
48
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Hexapod Robot (Created using fusion 360) — 18 DOF Walking Platform

Six-legged walking robot with three joints per leg (coxa, femur, tibia), each driven by its own hobby servo for 18 degrees of freedom total.

Electronics: an Arduino Mega 2560 as the main controller, with two PCA9685 16-channel PWM driver boards over I2C handling all 18 servo channels. Servos run off a separate power supply.

Firmware runs in two modes — inverse kinematics with a tripod gait and body pose control (translate, roll, pitch, yaw), and forward kinematics for direct joint jogging during calibration. Commanded over USB serial via keyboard (Can be found here:https://github.com/ryanchau20).

CAD includes the chassis plate, coxa/femur/tibia link brackets, and servo horn mounts.