1 / 7
Zoom Lens Desk Cup / Storage Box / Piggybank — zdjęcie 1
1 / 7

Zoom Lens Desk Cup / Storage Box / Piggybank

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A versatile storage box, with a camera lens-inspired look. Ideal for pens, photography equipment, tools, present ...

Ocena
0 / 5
Polubienia
7
Pobrania
17
Wydruki
0
Wyświetlenia
83
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

A very attractive storage box that looks just like a real lens.

There is a standard box and one with a screw-top lid.

Only two ring-shaped support surfaces are required. (see photo)

If you wish, you can print the adjustment rings and decorative rings in different colours.

The 3MF file has all the settings for support, colour changes and printing pre-configured. Any colour changes that aren’t needed can simply be removed in the slicer.

The height settings for filament changes are 16.4, 39.2, 49, 82.2, 97.8, 103, 104.6.

In addition, the option: Layers and Perimeter -> Scarf joint placement: Everywhere is very good for avoiding the Z-seam.  (Translated options, maybe the original description is different)

Changes:

07.11.26 Added a piggy-bank lid

....................................................................................................................................

Deutsch

Eine sehr schöne Aufbewahrungs-Box, die wie ein echtes Objektiv aussieht.

Es gibt eine normale Dose und eine mit Schraubverschluss.

Es werden nur 2 ringförmige Supportflächen benötigt. (Siehe Foto)

Wer will kann die Einstellringe und Deko-Ringe in unterschiedlichen Farben drucken.

Das 3mf-File hat alle Einstellungen für Support, Farbwechsel und Druck vorbereitet. Nicht benötigte Farbwechsel können im Slicer einfach entfernt werden.

Die Höheneinstellungen für den Filamentwechsel sind 16,4 39,2 49 82,2 97,8 103 104,6

Außerdem ist die Option: Schichten und Perimeter -> Platzierung der Scarf-Fuge: Überall sehr gut, um die Z-Naht zu vermeiden

Änderungen:

07.11.26  Spardosendeckel hinzugefügt

Tagi