Two Trees TTC450 Pro – Z-Axis Anti-Play Shims / Stabilizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple and effective 3D printed solution to reduce excessive Z-axis play on the Two Trees TTC450 Pro CNC router.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
TTC450 Pro – Z-Axis Anti-Play Fix
A simple 3D printed modification to reduce unwanted play in the Z-axis of the Two Trees TTC450 Pro CNC router.
The Z-axis on my TTC450 Pro had a lot of unwanted movement, which was unacceptable for accurate CNC machining.
Instead of replacing mechanical components or rebuilding the entire assembly, I designed these simple 3D printed shims to help eliminate the play.
Features
Simple and compact design
Easy to 3D print
No major modifications to the CNC machine
Helps reduce unwanted Z-axis movement
Designed specifically for the Two Trees TTC450 Pro
Installation
Print the required parts.
Position the shims at the Z-axis assembly as shown in the photos.
Check the fit and adjust if necessary.
Move the Z-axis through its full travel and check for binding or excessive friction.
Verify that the assembly moves smoothly before operating the spindle.
Important
Every machine may have slightly different tolerances. Check the fit carefully and make sure the shims do not interfere with normal Z-axis movement.
This modification worked on my own TTC450 Pro, but results may vary depending on your machine's condition and tolerances.
Why share this?
Because CNC machining is much more enjoyable when the machine actually does what it's supposed to do!
If this little modification helps another TTC450 Pro owner get better results, it's worth sharing.
Designed by Apache Smoke Design
Happy machining!