1 / 2
Voron 0.2 carbon fibre x-beam nut holder — zdjęcie 1
1 / 2

Voron 0.2 carbon fibre x-beam nut holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small print which will hold the nuts inside inside a cf x-beam of a voron 0.2 to help with installation

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
6
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This small print will hold the 3 M3 nuts required per side to mount the x-beam of a Voron 0.2.

This enables you to install the x-axis without worrying about the placement and countering of the nuts while installing and squaring the gantry.

There are stl & stp files for both DIN EN ISO 7089 (DIN 125 A) marked as "_S" with Ø7mm outer diameter as well as ISO 7093 (DIN 9021) with Ø9mm outer diameter marked as "_L"

Print in standard Voron settings.

I tested them with a Tulip 2.0 gantry but according to CAD it should also work with the stock gantry.

Let me know if it worked for you

Happy printing :)

Tagi