Voron 0.2 carbon fibre x-beam nut holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small print which will hold the nuts inside inside a cf x-beam of a voron 0.2 to help with installation
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This small print will hold the 3 M3 nuts required per side to mount the x-beam of a Voron 0.2.
This enables you to install the x-axis without worrying about the placement and countering of the nuts while installing and squaring the gantry.
There are stl & stp files for both DIN EN ISO 7089 (DIN 125 A) marked as "_S" with Ø7mm outer diameter as well as ISO 7093 (DIN 9021) with Ø9mm outer diameter marked as "_L"
Print in standard Voron settings.
I tested them with a Tulip 2.0 gantry but according to CAD it should also work with the stock gantry.
Let me know if it worked for you
Happy printing :)