ender 3 v3 se ikea rolfstorp lightbar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
lightbar for ender 3 v3 se
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
About the project
The light source is an IKEA Rolfstorp; it can be powered by 3 AA batteries (they last around 5h in this sceniario), however, you can also power it by USB-A to Micro USB cable that's provided with the light.
The construction is steady enough while printing; it doesn't make a sound or woble aroud.
The tolerances are more on the tighter side, but they aren't too tight.
You can see my webcam view on the last picture.
Printing istructions
!decent bed adhesion needed!
I would consider using a brim if it still refuses to stick to the surface.
It's already in a good printing position.
My printing settings:
-0.2 layer height (0.3 first)
-25% gyroid infill
-3mm brim
why?
I have used this model before thats where i got the idea how it could work but it was too wobbly and it consistently wobbling around stared pissing me off, thats why i decided to make my own version.