Gridfinity Bin for Garmin Varia RTL515 + Wahoo TRACKR Strap – Stackable, 2 Colours
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable 3×2 Gridfinity bin, 60 mm: radar flat with a quarter-turn mount well, HR strap rolled up next to it.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
What it is
One stackable Gridfinity bin for the Garmin Varia RTL515 radar tail light and the Wahoo TRACKR heart-rate strap. The radar lies flat in a snug pocket with a well under it for its quarter-turn mount; the strap, rolled around its sensor, sits in the compartment beside it.
Features
Gridfinity 3×2, 60 mm overall height with the stacking lip
Radar pocket 100.6 × 41.6 mm (1 mm clearance), a finger notch at each end
Long well (32 mm wide, 6 mm deep) under the pocket for the quarter-turn mount, so the radar sits flat
Side compartment 120 × 35.5 mm, about 43 mm deep: the TRACKR strap rolled around its sensor (roll it no wider than 35 mm), or the cable and seatpost mount
Standard stacking lip: any Gridfinity bin of the same size stacks on top
Heights follow a 20 / 40 / 60 mm series, so a full stack stays within 120 mm
Print settings
PLA or PETG, 0.4 mm nozzle, 0.2 mm layers, 15 % infill
No supports, no brim
The 3MF assigns the colours: slot 1 red, slot 2 white. Red is a 0.6 mm inlay on the pocket and well floors, three layers only.
Single colour: print the white STL alone.
Notes
Printed and tested with my own RTL515 and TRACKR strap (photos): the radar drops in with about 1 mm of play, and the rolled-up strap fits its bay with room to spare.
Designed with AI assistance (parametric Python script).
En français
Bac Gridfinity 3×2 empilable de 60 mm hors tout pour le radar Garmin Varia RTL515 et la ceinture cardio Wahoo TRACKR : radar à plat dans une empreinte avec 1 mm de jeu et un creux oblong de 6 mm pour la fixation quart de tour ; à côté, un compartiment de 35,5 mm de large pour la ceinture enroulée autour du capteur (à rouler sur 35 mm de large au plus). Lèvre d'empilement standard, sans support, fond rouge (emplacement 1), bac blanc (2).