Witch's Cauldron Candy Bowl – Cast-Iron Look, Dripping Potion Rim, Swinging Handle, No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Round cast-iron style cauldron on claw feet, riveted bands, green potion drips and a snap-in handle. No supports.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution
What it is
A proper witch's cauldron for Halloween candy: a round belly standing on three claw feet, riveted cast bands, a rolled rim with green potion dripping down the sides, and a round wire handle that snaps in and swings. Fill it for trick-or-treaters or put it on the party table.
Features
Ø 123 × 100 mm (Ø 120 belly), holds about 0.4 L of candy
Smooth round body with a domed bottom, raised 14 mm off the table by three claw feet
Riveted band on the belly (18 rivets), two thinner cast rings, ears hanging under the rim
Rolled rim with green potion and ten drips running down onto the shoulder
Removable bail handle: Ø 5.2 mm round wire, pegs that click into teardrop holes in the ears, 0.4 mm of play, swings 90° to each side
Every overhang is 45° or less and the holes are teardrops: no supports anywhere
Print settings
PLA, 0.4 mm nozzle, 0.2 mm layers
The cauldron prints upside down, flat rim on the bed: that is what lets the bottom be truly round. The 3MF is already set this way
Handle flat, next to the bowl (both on one 250 × 220 plate in the 3MF)
No supports, no brim. 3 perimeters, 15 % infill (the space under the bowl's cone-shaped floor is filled by infill)
Roughly 4 h and about 110 g for the set (estimate, check your slicer)
To fit the handle, spread its ends slightly and push the pegs into the ears
Food safety: wrapped candy only, or use a bowl liner
Colours
Black recommended for the bowl and handle (slot 3 in the 3MF; grey works too)
Green potion (slot 4): the first 8 mm on the bed are green only, then about 12 mm of shared layers for the drips (tool changes on those layers only)
Single colour: chaudron-une-couleur.stl (also upside down) and anse-noir.stl
File names are in French: chaudron = cauldron, anse = handle
Make it yours
gen.py (Python, manifold3d) holds the profile, bands, rivets, feet, ears, drips and handle. The script checks every overhang on the flipped part, that the potion never reaches the inside of the bowl, the handle clearance and its swing.
Designed with AI assistance (parametric Python script).
En français
Bol à bonbons en chaudron de sorcière façon fonte : panse ronde Ø 120 (Ø 123 × 100 mm hors tout), fond bombé porté par trois pieds-griffes, cerclage riveté et deux joncs, lèvre roulée avec potion verte et dix coulures, anse en fil rond Ø 5,2 qui se clipse dans les oreilles (trous en goutte d'eau, jeu 0,4 mm) et bascule de 90° de chaque côté. Environ 0,4 L. S'imprime à l'envers, lèvre plate sur le plateau, sans aucun support (3MF prêt : noir 3, vert 4 ; changements d'outil sur une douzaine de millimètres seulement). Environ 4 h et 110 g (estimation). Bonbons emballés seulement.