Paint Stand / Drying Rack - for skewers, dowels or string
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A-frame paint and drying stand. Hang parts on string, bamboo skewers or 4 mm dowels while you prime, paint and let dry.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Standard Digital File License
A simple, sturdy stand for priming, painting and drying 3D-printed parts, miniatures, cosplay props and other small projects. Two A-frame end pieces are joined by brackets at the base, and each frame has several holes so you can set it up the way the job needs.
How to use it
String or line – thread fishing line, wire or string between the frames and hang parts from hooks or paper clips.
Skewers – push standard bamboo skewers through the holes and mount parts directly on them.
Dowels / rods – use 4 mm dowels or rods for heavier parts or longer spans.
Mix and match – use several holes at once to hang parts at different heights.
Holes in each end frame
1 × Ø3 mm at the very top – fits bamboo skewers or thin line
4 × Ø4 mm (top center, left side, right side and lower center) – for 4 mm dowels, rods or thicker skewers
Size
End frame: 150 × 200 mm (W × H)
Bracket height: 40 mm
Files
PaintStand_v5.stl – end frame (print 2)
Bracket.stl – connecting bracket (print 2)
Paint_stand_project.3mf – project file
Print tips
Print the end frames lying flat so the holes come out round.
Small holes often print a little tight. If a skewer or dowel doesn't fit, run a 3 mm or 4 mm drill bit through the hole.
PLA or PETG both work fine.