1 / 2
Replacement Part for Panasonic ER430 Nose & Ear Hair Trimmer — zdjęcie 1
1 / 2

Replacement Part for Panasonic ER430 Nose & Ear Hair Trimmer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

middle ring

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
7
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution

Replacement retention / mount ring for the Panasonic ER430 nose and ear hair trimmer.

The original factory part features an internal fine mesh filter to capture trimmed hairs in the vacuum compartment. This 3D-printed version is designed without the mesh filter — it serves purely as a structural adapter ring to securely attach the top blade housing assembly onto the trimmer body so the device remains fully functional if your original ring broke or got lost.

  • Compatibility: Panasonic ER430 nose & ear hair trimmer.

  • Design Feature: Meshless design. Restores full mounting function for the upper cutting assembly.

  • Print Settings Recommendations:

    • Material: PETG or ABS/ASA recommended for flexibility, snap-fit durability, and resistance to washing/cleaning.

    • Layer Height: 0.12–0.16 mm (recommended for clean threads and precise snap tabs).

    • Wall Loops / Perimeters: 3–4 walls.

    • Infill: 50–100%.

    • Supports: Minimal or none required depending on print orientation.

Tagi