1 / 5
Holybro Kopis X8 – Dual 6S LiPo Battery Tray & Landing Gear Mount — zdjęcie 1
1 / 5

Holybro Kopis X8 – Dual 6S LiPo Battery Tray & Landing Gear Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Custom TPU battery tray for the Holybro Kopis X8 CineLifter. Holds two 2200mAh 6S LiPo batteries underneath the drone fo

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
9
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Holybro Kopis X8 – Dual LiPo Battery Tray

I designed this custom TPU battery tray for my Holybro Kopis X8 CineLifter to improve battery placement, weight distribution, and center of gravity.

The tray holds two 2200mAh 6S LiPo batteries underneath the drone, making better use of the available space while keeping the batteries clear of the landing gear.

Features

  • Designed specifically for the Holybro Kopis X8

  • Holds two 2200mAh 6S LiPo batteries

  • Underneath mounting for improved center of gravity

  • Flexible TPU construction

  • Split snap-on mounting clips

  • No landing gear disassembly required

  • Integrated battery strap slots

  • Ventilation openings

  • Battery straps also help stiffen the landing gear assembly

  • Compact and lightweight design

Easy Snap-On Installation

The cylindrical mounting clips feature a split underneath, allowing them to flex open and snap directly onto the existing landing gear tubes.

Simply spread the clips slightly and press the tray into position.

No screws, modifications, or landing gear disassembly required!

Important Fitment Note

The fit is intentionally very tight. Depending on your printer calibration and tolerances, the split may be partially fused after printing.

If necessary, carefully separate the split before installation.

With correctly printed TPU, the clips should flex enough to snap onto the landing gear.

Battery Installation

  1. Snap the tray onto the landing gear tubes.

  2. Position both LiPo batteries in the tray.

  3. Secure the batteries using suitable battery straps.

  4. Check that the batteries and tray are firmly attached.

  5. Verify propeller, wiring, and ground clearance before flying.

Printing Information

Material: TPU

TPU is recommended because the mounting clips need to flex during installation.

Print quality and dimensional accuracy are important for proper fitment.

About the Design

I wanted a practical way to carry two batteries underneath my Kopis X8 without modifying the original frame or landing gear.

After designing and printing the tray, I tested the fit on my own X8.

The result is a compact battery mounting solution that improves the battery placement while keeping installation simple.

Important

Designed and tested for fitment on my own Holybro Kopis X8. Battery dimensions and landing gear configurations may vary.

Always check that the tray and batteries are securely mounted before flight.

Designed by Apache Smoke Design

Happy printing and fly safe!

Tagi