Holybro Kopis X8 – Dual 6S LiPo Battery Tray & Landing Gear Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom TPU battery tray for the Holybro Kopis X8 CineLifter. Holds two 2200mAh 6S LiPo batteries underneath the drone fo
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 10
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Holybro Kopis X8 – Dual LiPo Battery Tray
I designed this custom TPU battery tray for my Holybro Kopis X8 CineLifter to improve battery placement, weight distribution, and center of gravity.
The tray holds two 2200mAh 6S LiPo batteries underneath the drone, making better use of the available space while keeping the batteries clear of the landing gear.
Features
Designed specifically for the Holybro Kopis X8
Holds two 2200mAh 6S LiPo batteries
Underneath mounting for improved center of gravity
Flexible TPU construction
Split snap-on mounting clips
No landing gear disassembly required
Integrated battery strap slots
Ventilation openings
Battery straps also help stiffen the landing gear assembly
Compact and lightweight design
Easy Snap-On Installation
The cylindrical mounting clips feature a split underneath, allowing them to flex open and snap directly onto the existing landing gear tubes.
Simply spread the clips slightly and press the tray into position.
No screws, modifications, or landing gear disassembly required!
Important Fitment Note
The fit is intentionally very tight. Depending on your printer calibration and tolerances, the split may be partially fused after printing.
If necessary, carefully separate the split before installation.
With correctly printed TPU, the clips should flex enough to snap onto the landing gear.
Battery Installation
Snap the tray onto the landing gear tubes.
Position both LiPo batteries in the tray.
Secure the batteries using suitable battery straps.
Check that the batteries and tray are firmly attached.
Verify propeller, wiring, and ground clearance before flying.
Printing Information
Material: TPU
TPU is recommended because the mounting clips need to flex during installation.
Print quality and dimensional accuracy are important for proper fitment.
About the Design
I wanted a practical way to carry two batteries underneath my Kopis X8 without modifying the original frame or landing gear.
After designing and printing the tray, I tested the fit on my own X8.
The result is a compact battery mounting solution that improves the battery placement while keeping installation simple.
Important
Designed and tested for fitment on my own Holybro Kopis X8. Battery dimensions and landing gear configurations may vary.
Always check that the tray and batteries are securely mounted before flight.
Designed by Apache Smoke Design
Happy printing and fly safe!