Build Plate Picker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original 3D printable design, easy to print and customize. Free for personal use, with attribution required.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple tool for a cleaner, easier and more precise way to handle your 3D printer build plates.
The Build Plate Picker by FABLuxES is designed to help you remove, position and align your build plates without touching the printing surface.
Keeping your fingers away from the plate helps prevent fingerprints, skin oils and grease from affecting bed adhesion.
Its curved, ergonomic shape provides a comfortable grip, while the fine internal micro-grip texture helps hold the plate securely.
Key Features
Remove and replace your build plate easily, without touching the printing surface.
Precise positioning: helps guide and align the plate when placing it back into the printer.
Cleaner handling: reduces fingerprints and grease contamination.
Improved grip: fine 0.20 mm internal micro-grip texture on both contact surfaces.
Insertion direction indicator: the colored dot indicates the correct orientation for sliding the picker onto the edge of the build plate.
Three sizes available: choose the version that best suits your build plate.
Convenient storage: leave the picker attached to the edge of a stored build plate, ready for its next use.
Simple, compact design: easy to print and use.
Available Versions
60 mm
75 mm
80 × 55 mm
The different sizes provide options for handling different build plates, including larger ones.
Printing Recommendations
For best results, print the pickers in pairs.
Using two pickers, one on each side of the build plate, gives you better control when lifting, removing and positioning it.
Check the fit on your particular build plate before use.
How to Use
Identify the correct insertion orientation using the colored dot.
Slide the picker onto the edge of the build plate.
Grip it firmly to lift or remove the plate without touching the printing surface.
When reinstalling the plate, use the picker to guide it into the correct position inside the printer.
Remove the picker once the plate is correctly seated, or leave it attached when storing the plate.
Important: Allow hot build plates to cool before handling. This is a handling accessory, not a heat-protective tool.
Designed by FABLuxES