Mouse trap that uses European jars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mouse trap that catches live mice in a jar.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 1
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Mice are as annoying in Europe as they are in US, so we deserve a mouse trap that fits our jars :)
This lid will fit a common jar with 82mm opening diameter.
The remixed model calls for filament as the pin that connects the ramp with the main body. I used small nails because it made the ramp move more easily.
What to pay attention to:
Print the ramp on the side with the opening for the weights facing up (see the image).
Put the weight into the ramp before assembly.
Leave the pivoting pins (filament or nails) longer, test that the ramp moves easily and only then trim them down.