Ricoh GRIII USB Port Cover Replacement - Print Flat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the USB port cover on the GRIII & IIIx. This version doesn't match the original shape, but is easier to print.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I just got my GRIIIx back from repair after 3 months! And the rubber USB port door immediately decided to crack and fall off...
While you can order rubber replacements on eBay, it seems like that part is actually a pain to get to, since I think you have to take off the front casing, which I'm not comfortable with personally.
I found this design for a replacement, and tried it out. It fits perfectly on my IIIx... but unfortunately it inspired me to make my own design.
While the model I referenced matches the original shape of the camera body perfectly, mine just aims to cover the port itself and the side where your hand makes the most contact - and is optimized to be easier to print, with only 45 degree overhangs. It also prints with the outside down, so you can get a nice textured bed texture if you want it to match the feel of the camera body more.
⚠ Only use this if you have to.
This design is intended to be used as a replacement if your port door has broken off, like mine did. As previously mentioned, removing that door intentionally seems like a huge pain and a risky surgery - and the original rubber door ultimately works better than this replacement. Only use this if you have to.
⚠ Disclaimer! Use at your own risk!
While I designed this with decent tolerances around the fragile connector in the middle of the usb c port, it does make me a little uncomfortable to put stuff into the plug. Be careful when inserting or removing this port cover, and don't put too much force on it.
Ultimately the safety of your gear is up to you, and I take no responsibility for any damages caused if your copy of this design breaks or does not work with your gear.