P
Printablespartiallyfrozen
Ricoh GR III Grip
Print at 0.20 No supports needed. BOM: Mounting screw I used.…
- Pobrania
- 418
- Polubienia
- 31
- Ocena
- 5
Wyniki wyszukiwania: ricoh
Liczymy pasujące modele…
P
Printablesjtf323
Ricoh GR III / IIIx Lens Cap
A simple lens cap for the Ricoh GR III / IIIx. I mainly created it to help keep any dust and debris away from the lens when I toss it in my pocket or bag. I printed it in Hatchbox TPU at 15% infill and it fits great.
- Pobrania
- 265
- Polubienia
- 38
- Ocena
- 5
P
Printablesantlers
Ricoh DB-110 (GRIII & GRIIIx) / Olympus LI-90b Battery Case
A little case that holds a few Ricoh GRIII / GRIIIx batteries (Ricoh DB-110 or Olympus LI-90b) The goal is just to hold batteries securely to protect the contacts and keep them from moving around awkwardly in a pocket or bag. I've tested…
- Pobrania
- 216
- Polubienia
- 22
- Ocena
- 3
P
Printableskingrikk
Ricoh DB-110 / Olympus LI-90b Battery Holder
Small holder for the batteries of the Ricoh GR III / GR IIIx. The battery slides in easily and is held by a snap lock at the top. Getting a battery out is simple since you can push them out from the bottom. This remix covers the battery…
- Pobrania
- 186
- Polubienia
- 16
- Ocena
- 5
P
Printablesd9xs
Battery Clip for Ricoh GR III (Suit DB-110 / LI-90B)
Mild remix of Virchow's battery clip design. I really liked the original, but I only needed 2 bays, and I've enlarged the dimensions slightly so the OEM Ricoh DB-110 battery slides in easily. Print Instructions ≤ 0.2mm layer height No…
- Pobrania
- 183
- Polubienia
- 20
- Ocena
- 5
P
Printabless.e.b.
Ricoh GRiiix / GR3 camera case TPU
Protective case for the Ricoh GRiiix or GRiii camera. It's designed to print-in-place with a flexible hinge. 4-6mm of cushy TPU surround the camera and provide good protection while keeping a lean profile in your bag. I printed mine out…
- Pobrania
- 172
- Polubienia
- 49
- Ocena
- 5
P
PrintablesSaggwell
Gridfinity Ricoh GRII Camera Holder & Dust Cover
Gridfinity 3x1x2 holder and dust cover for the GRII camera by Ricoh. Has some clearance at the top of the dust cover for a lanyard if you use one. Included are models with cuts outs for magnets or screws. Gridfinity concept by Zack Freedman
- Pobrania
- 168
- Polubienia
- 26
- Ocena
- 5
P
PrintablesNavi
Ricoh GR iii iiix dummy
Recently got a ricoh GR III camera. I needed a case and rather than bring the camera along to the shops to try them out, i designed this rough dummy camera in onshape using official photos and measurements. it's not perfect, but it's…
- Pobrania
- 165
- Polubienia
- 8
- Ocena
- 5
P
Printablesantlers
![Ricoh GRIII / GRIIIx Compact Arca Tripod Plate [UPDATED]](https://media.printables.com/media/prints/543609/images/4373777_127f5993-85b5-4064-8c47-d8896a24f406/img_6615-2up.jpg)
Ricoh GRIII / GRIIIx Compact Arca Tripod Plate [UPDATED]
This is a significantly improved version of my compact arca-type tripod plate designed to fit the Ricoh GRIII / GRIIIx. See the end for details about what's new/different. Pictured here in Protopasta dusty smoke HTPLA and Prusament PETG…
- Pobrania
- 162
- Polubienia
- 22
- Ocena
- 0
P
PrintablesVirchow
Battery Clip for Ricoh GR III / IIIx (fits DB-110 / Li-90b) Triple Clip
Pretty much self explanatory, if you need a model with looser tolerances due to printer or out-of-spec batteries let me know The triple-clip is for carrying four batteries total , one in your camera and additionally three in the clip.…
- Pobrania
- 136
- Polubienia
- 20
- Ocena
- 0
P
PrintablesBjörn
Ricoh DB-110 / Olympus LI-90b Battery Holder
Small holder for the batteries of the Ricoh GR III / GR IIIx. I made versions for 4, 2 and 1 batteries (although I don't see much use in a single battery version tbh). The battery slides in easily and is held by a snap lock at the top.…
- Pobrania
- 134
- Polubienia
- 10
- Ocena
- 0
P
PrintablesGinger
Ricoh GR III 3 Battery DB-110 1020 Pelican Case Insert
Hi all, I have made a Ricoh GRIII DB-110 Battery insert for the 1020 Pelican Case. It holds 2 batteries perfectly, while keeping the GRIII from moving around too much in the case. Once printed, it should be pressed into the rubber insert…
- Pobrania
- 109
- Polubienia
- 9
- Ocena
- 0
P
Printablestim_db
Ricoh db-110 battery hanger
It's a casing/hanger to carry a spare db-110 battery for the GR III. The locking mechanism uses 2 sets of 5mm (diameter) by 2mm (thickness) magnets which are pressed and glued in place after printing.
- Pobrania
- 87
- Polubienia
- 19
- Ocena
- 0
P
PrintablesChristian Tengeler
perfect Ricoh GRiii thumb grip
This is a minimal but good holding thumb grip for the Ricoh GR iii and iiix. I have been trough several integration and version and finally I think I have nailed it. Have a try. For easy print you can use “A” and “B” stl to print without…
- Pobrania
- 86
- Polubienia
- 3
- Ocena
- 5
P
PrintablesDinomight
Ricoh GR iii/x Lens Ring
Decorative ring for the Ricoh GR iii series cameras (Fits all variants of iii and iiix including HDF versions) Any filament should work :) Recommended layer height ≤ 0.15mm This version of the ring should ‘click’ into place
- Pobrania
- 81
- Polubienia
- 8
- Ocena
- 0
P
Printablesectoplasma
Lens Cover for Ricoh GR III
Lens Cover for Ricoh GR III. Intended to be printed with PLA for a very mild fit. Would probably be too loose if printed with TPU - maybe scale it down a bit if you go that route.
- Pobrania
- 77
- Polubienia
- 4
- Ocena
- 0
P
Printablesdomis4
Ricoh GR1 Viewfinder Cover
i got a Ricoh GR 1 with a broken Viewfinder Cover and couldn't find any replacement for it. I had some time to create a viewfinder cover replacement in blender. Unfortunatelly i don't have an original one so i don't know how the top right…
- Pobrania
- 73
- Polubienia
- 6
- Ocena
- 0
P
PrintablesKeven
Ricoh GRiii Thumbgrip and Coldshoe
Ricoh gr3 thumbgrip with cold shoe on top to allow the use of a viewfinder. **The dimensions are made for the gv-1 viewfinder, I haven't tested with other accessories.
- Pobrania
- 72
- Polubienia
- 8
- Ocena
- 0
P
PrintablesStrangeCraft
Camera Thumb Grip(Sized for Ricoh GR3)
Makes holding camera a little easier, short and long versions available. Might fit other cameras. Fairly sturdy in PLA but obviously 3D printed thumb grip isn't going to be as strong as a metal one, use at your own risk. Printing…
- Pobrania
- 70
- Polubienia
- 11
- Ocena
- 5
P
PrintablesKatz Creates
Ricoh Theta S Stable Camera Base
Note : Photos show the old logo, files will have new updated Katz Creates logo! 360 cameras are wicked cool, but to get the most out of them, they need a stable base. This design was made to help out a friend who used a Ricoh Theta S 360…
- Pobrania
- 70
- Polubienia
- 9
- Ocena
- 4
P
PrintablesDizzelowski
Ricoh Theta Z1 2in1 Adapter/Stand
The Ricoh Theta Z1 camera has 2 problems, that can be solved using this model: The camera can not stand on its own if you want to use the USB-C port (e.g. for 360-Livestreaming) When using a tripod, the USB-C port is covered by most…
- Pobrania
- 69
- Polubienia
- 4
- Ocena
- 0
P
Printablestitrisol
35mm adapter for Ricohflex-Super
35mm adapter for my Ricohflex Super; get 24x55mm semi panoramic photos and the film advance is the same as 120 film. Used in conjunction with the 35mm spools that are found here: https://www.thingiverse.com/thing:522005 Printed at 0.2mm…
- Pobrania
- 59
- Polubienia
- 6
- Ocena
- 0
P
PrintablesXimple Printing
Ricoh GR thumb grip mounted on hotshoe
This is a remix of my thumb rest.
- Pobrania
- 53
- Polubienia
- 5
- Ocena
- 0
P
Printablesantlers
Ricoh GRIII/IIIx thumb grip
This is a shoe-mounted thumb grip for the Ricoh GRIII. Its low profile design is somewhat inspired by Squarehood's thumb grip - but unlike that one and any others I've seen online, this design positions the thumb grip wing in a way that…
- Pobrania
- 50
- Polubienia
- 6
- Ocena
- 0
P
Printablesfloe
Drive gear for Ricoh SP150 toner cartridge
Not much to say - I have a Ricoh SP150 laser printer, and a tiny gear in the toner cartridge broke which is used to drive the rollers inside. This is a replacement - but note that this is subjected to some pretty intense forces by the…
- Pobrania
- 46
- Polubienia
- 3
- Ocena
- 0
P
PrintablesRedeye
Ricoh theta Z1 cover
Prototype Protection cover for the lenses of the Ricoh Theta Z1 Changes for fit will be done after i got the cam Category: Camera
- Pobrania
- 45
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJim 248
Arduino Chip Reset Ricoh C250Dn Toner
Got this idea from Simmelbach (Arduino Chip Reset Ricoh SP213w Toner - Dupont Connector Holder). His holder seemed sort of small and potentially awkward. Also I didn't know if the Dupont connector would maintain enough pressure for good…
- Pobrania
- 43
- Polubienia
- 1
- Ocena
- 0
P
Printablesfunplore
A compact case for Ricoh GR II securely holds 4 DB-65 batteries
The Ricoh GR II is my favorite camera, bringing me endless joy in photography. However, during a full day of shooting, I find myself needing to carry at least four extra batteries, which can be a hassle when they’re rattling around in my…
- Pobrania
- 42
- Polubienia
- 4
- Ocena
- 0
P
PrintablesHesbas
Battery case Ricoh DB-120
Used 4 round magnets (6mm diameter, 1mm thick), glued in.
- Pobrania
- 39
- Polubienia
- 3
- Ocena
- 5
P
PrintablesSpotmatic
Ricoh 500 ME quick focus ring
A quick focus ring will make your Ricoh 500 ME more convenient to handle, easy to print too. Use film! Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter Supports: No Resolution: 200 Infill: 20 Filament: Your choice…
- Pobrania
- 36
- Polubienia
- 9
- Ocena
- 0
P
Printablesantlers
OLD VERSION - Ricoh GRIII / GRIIIx Compact Arca Tripod Plate
There's a new version! See https://www.printables.com/model/543609-new-version-ricoh-griii-griiix-compact-arca-tripod ! --- This is a very compact arca-type tripod plate designed to fit the Ricoh GRIII / GRIIIx. Note: It has only been…
- Pobrania
- 34
- Polubienia
- 5
- Ocena
- 3
P
Printablesantlers
Ricoh GR Compact Arca Tripod Plate
This is a very compact arca-type tripod plate designed to fit the Ricoh GR (first gen APSC). It probably will fit the GR II as well, but I haven't tested on that - If you're able to print a copy and give it a try, please leave a comment!…
- Pobrania
- 25
- Polubienia
- 6
- Ocena
- 0
P
PrintablesFireballII
Ricoh GR iii/x Wrist Strap adjuster
Take your time putting the strap through, it will fit.
- Pobrania
- 22
- Polubienia
- 5
- Ocena
- 0
P
PrintablesFloralCoal
Fujifilm GFX100RF adapter for Ricoh GR gt-2 x1.5 teleconverter
This adapter make it easy to swap the TC or the other filter adapter I made. Know that there is a big vignetting on the first 2 steps of the digital in camera TC. So this gives us 75mm equip @ 33mp and 95mm @ 20mp. You can also manually…
- Pobrania
- 22
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMarkus
Ricoh GW-3 to 77mm adapter for Ricoh GR II
Print in TPU to make sure it stays a snug fit. Holds the filter well even when shaking the camera. P.S. Do not shake cameras.
- Pobrania
- 21
- Polubienia
- 4
- Ocena
- 0
P
Printablesantlers
![Ricoh GX100 & GX200 Arca Tripod Plate [UPDATED]](https://media.printables.com/media/prints/597137/images/4754777_14ec3d5c-362a-4350-a5f1-d2f152ac7dd7_3a52c1ff-c46b-4fc7-a515-12d5f8b6a7d3/dscf2515.jpg)
Ricoh GX100 & GX200 Arca Tripod Plate [UPDATED]
This is a new and improved version of my compact arca-type tripod plate designed to fit the Ricoh GX100 and GX200. Pictured here in Prusament translucent PETG with 100% perimeters for no reason, I just thought it looks cool with the…
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDaPain
RICOH Cover sensor deactivator for technicans
Tool to deactivate sensors of covers from RICOH printers and multifunctional printers. For technican use only. Two sides for the different sensors. Print with 100% infill. 0.24 is enough
- Pobrania
- 20
- Polubienia
- 3
- Ocena
- 0
P
PrintablesRedeye
top piece for Insta360 One X, Xiaomi Mijia Sphere 360 or Ricoh Theta Z1 on Telesin and Insta360 extendes selfie stick
To replace the rubber part on the top for preventing the stick sliding of. Print in TPU or TPE with allow thin walls in the Slicer. Category: Camera
- Pobrania
- 19
- Polubienia
- 6
- Ocena
- 0
P
Printablesantlers
![Ricoh Theta Compact Arca Tripod Plate [UPDATED]](https://media.printables.com/media/prints/174691/images/1640358_51c3e30b-1bbc-44e0-bbf4-72995db4251f/large_display__dsf0874_174691.jpg)
Ricoh Theta Compact Arca Tripod Plate [UPDATED]
Note: The original version of this design did not work in some arca clamps because the wedge part was both too wide and not tall enough. This version should work with most tripods. Leave a comment or post a remix if you have any issues!…
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
PrintablesS. ayres
RICOH Auto Shot lens to EOS-M helicoid adapter
I had this old Ricoh Auto Shot from my parents that they bought as a decoration, lens was good so I disassemble it, took measures and made a thread like a Helicoid to focus it, works perfectly I STRONGLY recommend printing the lens holder…
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
Printablesphilosolver
Plate for Ricoh Theta Stick TM-2
Dieses Plättchen des Theta Stick bricht gern mal auseinander. Hier ist das Ersatzteil dafür :-) EIn Freund hat mich gebeten, einen Ersatz für seine Plate zu erstellen. Ich habe es mit ABS gedruckt, um es widerstandsfähig zu machen.
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
PrintablesFloralCoal
Ricoh GXR filter adapter
An adapter to put protective (or other) filter on GXR S10 and P10 lenses. It accpet 52mm filters when pressfit in reverse (front of the filter is pushed on the adapter barrel, see image) Print settings Nozzle size…
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
Printablesthomas
Ricoh GR IV DB-120 Battery Holder Insert for Pelican 1020 Case
Fits 1 DB-120 battery for the Ricoh GR IV in the Pelican 1020 case Print with 20% infill, supports not really required but you can for the little fillet at the base
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJakub
Ricoh ribbon lever
Replacement part for Ricoh printers for ribbon replacement Print Settings Rafts: No Supports: No Infill: 100 Filament: Any ASA
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSpotmatic
Ricoh 500ME aperture lock
For Ricoh 500ME, in order to lock the aperture in the 5.6 and the auto position. I use my Ricoh for infrared photography, by experience 1/30 second and aperture 5.6 is a good starting point for the Rollei Infrared film (EI 6). However,…
- Pobrania
- 11
- Polubienia
- 6
- Ocena
- 0
P
Printablesantlers
Print-Flat Hotshoe Cover for Ricoh GX100 & GX200
Now that I have a hotshoe cover design I like, I realized I never shared the design I made for the Ricoh GX200... So I updated it based on the new design, and here it is. It should print fine with the top side down, no supports at a 0.2mm…
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
Printablesantlers
OLD VERSION - Ricoh GX200 Compact Arca Tripod Plate
There's a new version! See https://www.printables.com/model/597137-ricoh-gx100-gx200-arca-tripod-plate-updated This is a very compact arca-type tripod plate designed to fit the Ricoh GX200. It probably will fit the GX100 as well, but I…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMksutov
Ricoh GR III Pocket Fit Dummy Model
I made this model when I was trying to choose between the Ricoh GR III and the Sony RX100 VII. Rather than relying only on listed dimensions, I wanted something physical that I could put in a pocket and immediately compare. So I modelled…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesРоман Сапрыкин
Paper capture RICOH SP C261SFNw
Paper capture bar for the RICOH SP C261SFNw printer in 2 versions, split and whole, use it to your health!
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFilthy Swine
Ricoh Kr5 Camera Grip Case V1.0
TPU Grip Case for use with KR5 camera Might fit other Ricoh, Cosina, and Pentax model SLRs but I havnt tried them I printed in TPU (95A) with 10% infill and no top or bottom layers I also added modifier to the bottom front of the part to…
- Pobrania
- 1
- Polubienia
- 3
- Ocena
- 0
P
Printablesantlers
Ricoh GRIII USB Port Cover Replacement - Print Flat
I just got my GRIIIx back from repair after 3 months! And the rubber USB port door immediately decided to crack and fall off... While you can order rubber replacements on eBay, it seems like that part is actually a pain to get to, since I…
- Pobrania
- 1
- Polubienia
- 1
- Ocena
- 0
P
Printables
Battery Clip for Ricoh GR III (Suit DB-110 / LI-90B)
Mild remix of Virchow's battery clip design. I really liked the original, but I only needed 2 bays, and I've enlarged the dimensions slightly so the OEM Ricoh DB-110 battery slides in easily. Print Instructions ≤ 0.2mm layer height No…
P
Printables
Ricoh AF-5 Lens Cap
The Ricoh AF-5 is a fairly unknown, but actually very solid, 35mm compact camera. Well, compact-ish. Anyway, it has a bizarre on/off system that is triggered by a button depressed by the lens cap, so if you don't have a lens cap you can't…
P
Printables
Print-Flat Hotshoe Cover for Ricoh GX100 & GX200
Now that I have a hotshoe cover design I like, I realized I never shared the design I made for the Ricoh GX200... So I updated it based on the new design, and here it is. It should print fine with the top side down, no supports at a 0.2mm…
P
Printables
Paper capture RICOH SP C261SFNw
Paper capture bar for the RICOH SP C261SFNw printer in 2 versions, split and whole, use it to your health!
P
Printables
Ricoh GX100 & GX200 Arca Tripod Plate [UPDATED]
This is a new and improved version of my compact arca-type tripod plate designed to fit the Ricoh GX100 and GX200. Pictured here in Prusament translucent PETG with 100% perimeters for no reason, I just thought it looks cool with the…
P
Printables
Plate for Ricoh Theta Stick TM-2
Dieses Plättchen des Theta Stick bricht gern mal auseinander. Hier ist das Ersatzteil dafür :-) EIn Freund hat mich gebeten, einen Ersatz für seine Plate zu erstellen. Ich habe es mit ABS gedruckt, um es widerstandsfähig zu machen.
P
Printables
Ricoh GR III / IIIx Lens Cap
A simple lens cap for the Ricoh GR III / IIIx. I mainly created it to help keep any dust and debris away from the lens when I toss it in my pocket or bag. I printed it in Hatchbox TPU at 15% infill and it fits great.
P
Printables
Ricoh GR III 52mm Filter Adapter
I couldn’t find a 52mm filter adapter model for the Ricoh GR III, so I made one for my magnetic filters. I printed the adapter in PETG since I mostly shoot outdoors, but PLA should work fine too. Printer Settings: Nozzle: 0.40 mm (A 0.60…
P
Printables
Ricoh GRiii Grip
GR3 grip and arca mount Battery door opens without removing the grip and there is hole for a 1/4 heat insert. There is also a loop for a wrist strap. You will need a small ¼ screw to attach to the camera.
P
Printables
Ricoh GR3 db-110 battery case
The top and bottom are the same height so you can print two of the same and use them like this. Required: 6x2mm magnets - 4 pc
P
Printables
Ricoh GXR base plate
This is a simple base plate for Ricoh GXR cameras. It is usefull to carry the camera flat against your body. You can have a shorter strap and the camera is less prone to jump around that way. Print settings Nozzle size…
P
Printables
Ricoh GR3 db-110 battery case V2
New version - better grip, increase polygon quality. The top and bottom are the same height so you can print two of the same and use them like this. Required: 6x2mm magnets
P
Printables
digicam grip for ricoh caplio r7
13年前？のリコーcaplio r7用のグリップ。 カメラ小さすぎるし、さらに握りつぶしてしまいそうでとても使いずらかった。 I made this to have a more standard camera grip shape. Ver.1 is here https://www.printables.com/model/1131000-digicam-grip
P
Printables
Ricoh GR III Case
The new enhanced rugged box is crafted to perfectly accommodate your Ricoh GR III or GR IIIx, featuring dedicated compartments for two spare batteries and an SD card. The precisely designed inlets provide such a snug fit that no glue or…
P
Printables
DB-110 Dual Battery Case - Ricoh GR iii/x Battery Case
Recommended layer height ≤0.2mm (sample image printed at 0.15mm w/ PLA)
P
Printables
Ricoh GR III Lens cap
A simple lens cap for the Ricoh GRIII/GRIII X (+HDF) for protection against dust and scratches. There are two versions GR3_Lenscap_onlyprint: This requires no extra parts. Can be printed directly in PLA or TPU. GR3_Lenscap_foamneeded…
P
Printables
Ricoh GR III filter adapters
Lens filter adapters for Ricoh GR III. Different thread diameters: 46mm, 48mm, 49mm, 52mm, 53mm. I only tested the 52mm version, but the others should work fine. You can download the FreeCAD project file (filter-adapter.FCStd) and edit…
P
Printables
Ricoh GRIII (GRIIIx) camera mount battery holder
A battery holder for the Ricoh GRIII series of cameras that can be fastened to the bottom of the camera using the printed hardware. I needed a way to carry an extra battery with me for all day shooting so I remixed the linked holder.
P
Printables
Ricoh GR III Case - Remix iM20 - USB C SD Adapter
Modified Bjarnelutz's awesome rugged box design to hold a few extra items like a USB C SD card reader and Godox iM20 flash The usb reader is this one, but can be found on Ali for under $2. https://www.amazon.com/dp/B0B9RRYMLJ
P
Printables
Ricoh GR III Case Spacer with Spare Battery and SD slots for Pelican 1020
Case insert for Pelican 1020 case. Holds 1 spare battery (DB-110) and 2 spare SD cards. Printing Notes: Printed with PETG standard Prusa Slicer settings. Position the model upside down on the build plate to prevent overhangs. Holes are…
P
Printables
Ricoh AF-5 Lens Cap
The Ricoh AF-5 is a fairly unknown, but actually very solid, 35mm compact camera. Well, compact-ish. Anyway, it has a bizarre on/off system that is triggered by a button depressed by the lens cap, so if you don't have a lens cap you can't…
P
Printables
DB-120 Battery Cap for Ricoh GR IV
I wanted a battery cap for my spare battery for my Ricoh GR-IV, so I made one.
P
Printables
Ricoh GR III battery box
This is a simple battery box for the DB-110 battery which fits the Ricoh GR III. I think it's kind of unsafe to carry this battery around unprotected so I made this case. It features a print-in-place hinge that depends on semi-flexible…
P
Printables
Ricoh Transfer case spring holder
This is an internal part of a Ricoh transfer unit. It holds the spring that puts pressure on the paper. Printed with a Prusa MK3s, 0.2mm 100% infill, supports on build plate only. Printed in Prusament Galaxy Black
P
Printables
Ricoh GR Lens Ring
Lens ring for the first digital Ricoh GR camera. It is not identical to OEM. Quite frankly the OEM lens ring is a cluster f* on the inner side for no other reason then to block aftermarket parts being made. I printed this once and had to…
P
Printables
HSW Ricoh GR3x camera holder
This a Ricoh GR3x camera holder for Honeycomb Storage Wall Print settings: Supports: YES, bed only 0.2mm layer height, PETG 这是一个用于 蜂窝挂钩系统 的理光GR3x相机的挂架 打印设置： 支撑：是，仅在打印版生成 0.2mm层高，PETG
P
Printables
Ricoh GRIII replacement USB cover
A replacement USB cover for Ricoh GRIII. Might need a little trimming depended on your printer's tolerance. Should also works on GRIIIx. Printed on 0.4 nozzle and 0.2mm layer height.
P
Printables
Ricoh GR / GRII 52mm filter adapter
A GReat accessory for your Ricoh GR and GRII I have test printed it in PLA, PETG-CF and PATH-CF unsing a layerhight of 0.16mm with good results. With supports! I also recommend using a well-calibrated printer. I have tested the STL on…
P
Printables
Ricoh GR III/x Filter Mount
This printable ring is designed to hold the glass from a 43mm Tiffen GlimmerGlass 1 filter. Any 43mm filter glass should work, unless it's thicker than the Tiffen GG 1. The glass is taped inside this ring, and then the ring+glass assembly…
P
Printables
Ricoh GR III Lens Ring
This is a lens ring for Ricoh GR III with 3 mounting positions around the lens.
