1 / 5
Battery Clip for Ricoh GR III / IIIx (fits DB-110 / Li-90b) Triple Clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TL;DR I was fed up with bulky battery clips that are available, spent a bit too much time on it but now this exists
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 136
- Wydruki
- 0
- Wyświetlenia
- 576
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (30)Powiązane
Pretty much self explanatory, if you need a model with looser tolerances due to printer or out-of-spec batteries let me know
The triple-clip is for carrying four batteries total, one in your camera and additionally three in the clip.
Just slide the batteries in from the top, the flex-clips hold them in place. No need to pull on or “adjust” the flex-clips - simply push the battery up from the slim bottom opening.
Print Instructions
> PRINT SETTINGS <
- ≤ 0.2mm layer height
- no supports required (orientation w/ battery openings up)
- brim optional to prevent warp
> SIDE NOTES <
- Printing slow with quality settings recommended (gets best layer adhesion and part strength, especially on the flex-clips)
- Flex-clips are designed to work with any tough filament (preferably PETG or any other flexible material though)
- Fitted for aftermarket batteries (OG Ricoh DB-110 batteries fit fine but sliding is not as smooth)