Ricoh GR Lens Ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lens ring for the first digital Ricoh GR camera
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 213
- Wydruki
- 0
- Wyświetlenia
- 1278
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Lens ring for the first digital Ricoh GR camera. It is not identical to OEM. Quite frankly the OEM lens ring is a cluster f* on the inner side for no other reason then to block aftermarket parts being made.
I printed this once and had to physically cut away one section for it to fit. I've since modified the model to the physical changes that I've made. If it still doesn't fit for you, let me know and I can change it.
I strongly recommend PETG. Don't scale it up/down. Seams at the “bottom” (see screenshot). It is only mounted in one way with the “bottom” at the bottom left of the lens.
If you insist PLA and it ends up breaking, I would recommend you thicken the ring. Not much you can do about the strengthening the “threads” on the inside.
edit: added a ribbed version
edit2: added RB that closes up the gap at the top, the tradeoff is that the max overhang angle is 34.5 degrees. PETG with good cooling shouldn't experience any problems. I kept the original files for people who want a less challenging print.