SKÅDIS Wera 3950 Hex-Plus hex key set holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drop in, read markings, no obstructing
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I saw there are already five or six other versions but all miss out on a thing I want. I wanted to model the radius in the bend of each key so that the key sits more naturally in the holder. I wanted the keys to be dropped in from the top rather than clipped in, but not obstruct any other key (as they do in the supplied holder). I wanted to be able to get a key out easily (unlike the supplied holder). I wanted to be able to see the markings on the side of each key - sometimes I know which key to grab by colour but not always if it is a size I don't use often. Being able to see the text means storing the key at a 45 degree angle.
Probably the inch set would fit, I have the metric set.
Print with the base flat on the sheet so that the circular cuts are touching it, the top will slope with the contours facing up - no supports are needed.
Again this uses the slide-in hooks used by TJDesign.