1 / 4
Terracotta Post Topper: a clay-style planter that sits on a hollow railing post — zdjęcie 1
1 / 4

Terracotta Post Topper: a clay-style planter that sits on a hollow railing post

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clay-style planter that wraps a hollow railing post. Slide-on V-rail fit, soil reaches into the post. No supports.

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
13
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Turn a plain hollow railing post into a flower pot. This classic terracotta-style planter wraps around the top of a rectangular hollow post, and a liner drops into the post itself. The plant gets one big root space that goes from the pot right down into the post.

How it works

- Insert: slides into the hollow post, and its 45° funnel rests on the post's top edge so it centres itself.

- Pot: slides on from the front around the post and hangs on two V-rails on the insert. No screws or tabs.

- Seam covers: two small caps clip over the rim joints, which keeps it all tidy and stops the parts sliding apart. Glue them if you want it permanent.

Printing

- Every part prints without supports. The pot and insert print upright; the seam covers print lid-down.

- 0.2 mm clearance on every fit.

- 3 mm walls, so use 3–4 perimeters. PETG is recommended outdoors.

- Drain holes in the pot floor and at the bottom of the insert.

Fits: hollow posts with an inner opening of at least 35.5 × 67.5 mm and an outer size up to 47.5 mm wide. Measure your post first.

Size: Ø160 × 170 mm, about 2.3 L of soil.

Tagi