Terracotta Post Topper: a clay-style planter that sits on a hollow railing post
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clay-style planter that wraps a hollow railing post. Slide-on V-rail fit, soil reaches into the post. No supports.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
Turn a plain hollow railing post into a flower pot. This classic terracotta-style planter wraps around the top of a rectangular hollow post, and a liner drops into the post itself. The plant gets one big root space that goes from the pot right down into the post.
How it works
- Insert: slides into the hollow post, and its 45° funnel rests on the post's top edge so it centres itself.
- Pot: slides on from the front around the post and hangs on two V-rails on the insert. No screws or tabs.
- Seam covers: two small caps clip over the rim joints, which keeps it all tidy and stops the parts sliding apart. Glue them if you want it permanent.
Printing
- Every part prints without supports. The pot and insert print upright; the seam covers print lid-down.
- 0.2 mm clearance on every fit.
- 3 mm walls, so use 3–4 perimeters. PETG is recommended outdoors.
- Drain holes in the pot floor and at the bottom of the insert.
Fits: hollow posts with an inner opening of at least 35.5 × 67.5 mm and an outer size up to 47.5 mm wide. Measure your post first.
Size: Ø160 × 170 mm, about 2.3 L of soil.
