House lettering extra legible 5 1/3 inch 135mm Franklin Gothic Bold with contrast
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4mm thickness with a 3mm contrast border
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Public Domain
I wanted some very legible letters that would pop - and Franklin Gothic Bold really speaks that way. I used the Libre Franklin font library from Google and built these in Fusion. I gave each a 3mm border. If you would like to do a contrast outline, color swap after 2mm. I printed at 0.20mm layer height, so I performed my color change at 2.2mm.
I'd recommend printing with ASA material if these are going outdoors.
There are some simple screw holes to accept #6 size pan-head screws (holes are 4mm with a 7mm counterbore). You'll only really need 3/4 or 1" fasteners, as the letters are only 4mm thick. I didn't spend a lot of time getting the holes aligned perfectly with the world, but they should be functional. I could use a class on holes in letters. ;)