House lettering extra legible 5 1/3 inch 135mm Franklin Gothic Bold with contrast
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
4mm thickness with a 3mm contrast border
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Public Domain
I wanted some very legible letters that would pop - and Franklin Gothic Bold really speaks that way. I used the Libre Franklin font library from Google and built these in Fusion. I gave each a 3mm border. If you would like to do a contrast outline, color swap after 2mm. I printed at 0.20mm layer height, so I performed my color change at 2.2mm.
I'd recommend printing with ASA material if these are going outdoors.
There are some simple screw holes to accept #6 size pan-head screws (holes are 4mm with a 7mm counterbore). You'll only really need 3/4 or 1" fasteners, as the letters are only 4mm thick. I didn't spend a lot of time getting the holes aligned perfectly with the world, but they should be functional. I could use a class on holes in letters. ;)