Compact Geared Bowden Extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a combination of parts that adds up to a fairly compact geared extruder, with mounting ears to attach to 2020…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a combination of parts that adds up to a fairly compact geared extruder, with mounting ears to attach to 2020 extrusions. See HC300-NOTES.md for assembly instructions.
exploded_view.stl shows how everything goes together.
I haven't yet gotten around to finishing my Hypercube, but I recently converted my A8 to bowden extrusion, so I whipped up a mounting adapter and put it on the A8 for testing. Preliminary testing looks good so far.
(Project mirrored at https://gitlab.com/salfter/hypercube-300-remix/tree/master/extruder/geared_3. The FreeCAD file and other resources used to produce exploded_view.stl is over here, if you want to play with the visualization a bit more.)
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
100%
Filament: eSun PLA+ fire-engine red
Notes:
2 and 3 perimeters (use Cura's "alternate extra wall" feature), 4 top and bottom layers, and 100% infill, because these parts need to be as strong as you can make them. I might even have used 3 and 4 perimeters instead of 2 and 3; I can't recall for sure right now. :)
With the fasteners tightened down and the tension dialed up a bit, it was quite strong...still had to take it back apart because some fasteners had come undone. Make sure you use either threadlock or nylock fasteners; if you use threadlock, test it to make sure it's compatible with the plastic you're using.Keeping this tagged "work in progress" until my Hypercube 300 is up and running.
Category: 3D Printer Parts