Lufthansa 747-8 Scale Model

A scale model of the Lufthansa Boeing 747-8. Hand-modeled by a real person for Hack Club Atlantis.

Editor File (Onshape)

Atlantis Submission

Print Quantity:

The "No Stand" folder has the exact number of parts you need for each print. To print with a stand replace the corresponding parts with the ones in the "Stand" folder.

• 1 Forward body

• 1 Rear Body

• 1 Right Elevator

• 1 Left Elevator

• 1 Right Wing

• 1 Left Wing

• 1 Wing connector (Stand has a hole in the middle)

• 4 Engines (One of each [1,2,3,4])

• 4 Engine Turbines

Each of the engines is different. Please reference the numbers engraved on the top of the engines and the bottom of the wings to find a match.

• 1 Engine 1

• 1 Engine 2

• 1 Engine 3

• 1 Engine 4

Assembly:

• Align the front and back body sections and glue them together.

• Insert the wing connector into the forward body section  (If assembling the version with the stand, ensure you have the correct engine connector with the hole in it)

• If using the model with a stand, insert the stand into the hole in the bottom of the fuselage and push it through the hole in the wing connector, then glue it into place.

• Slide the wings onto the connector from the back, then glue them to the body.

• Glue the elevators onto the back rear section of the body in their respective slots.

• Glue on the tail into the cutout in the top of the rear body.

Print Settings:

• For Large Body Sections, Wings, Elevators, and Rudder (Plate 1)

  • 0.4 mm Nozzle

  • 0.2 mm Layer Height

  • Support

    • Tree

    • Auto

• For High-Quality Small Parts (Plate 2)

  • With 0.2 mm Nozzle

    • 0.08mm Layer Height

  • With 0.4 mm Nozzle

    • 0.12mm Layer Height

  • Support

    • Tree

    • Auto

In-Progress Additions:

• Open body version/cargo

• Scaled up for larger printers