Spherical Gears CV joint
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this as to see if this mechanism could've been used for my mechanical snake design, but I didn't use it, whatever
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Share Alike
I made this as to see if this mechanism could've been used for my mechanical snake design, but it ended up being too bulky and not quite reliable, so I went with a simple UV joint for that. These are basically two spur gears that their teeth profiles got sweep toward the center of an arch or a sphere, then they are jointly linked with the use of two simple flat spur gears to keep them moving in a rolling joint fashion. All the parts are on one file, just split them up and print them with default settings. Here it is in action on my TikTok here https://www.tiktok.com/@3dmakerking69/video/7691364297036942606?is_from_webapp=1&sender_device=pc
Printer- QIDI Xmax model 1
Filament- PLA Purple
settings- Default
Hardware- Super Glue