SCS8UU Bushing Block/Optical Endstop Combo for Anet A8
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The stock bearing blocks aren't tapped on the side to which the optical endstop targets in…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The stock bearing blocks aren't tapped on the side to which the optical endstop targets in https://www.thingiverse.com/thing:2873216/files are to be attached, and I kinda wanted to replace the bearings with bushings anyway to reduce noise, so I mashed the two together.
Print one each of SCS8UU_bushing_block_with_optical_endstop_X.stl, SCS8UU_bushing_block_with_optical_endstop_Y.stl, OptiXB.stl, and OptiYB.stl for a complete set. Add optical endstops (such as https://amzn.to/2PNgsD3) and bushings (such as https://www.aliexpress.com/item/-/32476367665.html) and install in place of the stock mechanical switches.
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
30%
How I Designed This
OptiXA.stl and OptiYA.stl needed fixing with MakePrintable before I could bring them into OpenSCAD for integration with the bushing block.
Category: 3D Printer Parts