Moon Tombstone Desk Organizer with Removable Backboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Moon Tombstone Desk Organizer with Removable Backboard. Complete default-size STL + STEP files.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A stepped desk organizer with a removable tombstone backboard, raised moon and star details and a sculpted stone frame. Front compartments and a rear pocket separate keys, clips and stationery.
Dimensions and storage layout can also be adjusted on the model page:
https://boxesmodel.com/models/halloween-moon-tombstone-station
Overall dimensions, front compartment count, rear pocket depth and wall thickness can be adjusted. Backboard pegs and matching slots regenerate together.
The files here are the complete fixed default-size version. Custom exports follow the pricing shown on the model page.
DEFAULT SIZE AND ASSEMBLY
170 x 120 x 170.01 mm overall. Default front bay width: approximately 80.2 mm; front depth: 61 mm; rear depth: 38 mm. Backboard pegs insert 12 mm; nominal mating clearance: 0.45 mm per side.
Two printed parts: base and backboard. Remove supports from the pegs and blind slots, then lower the backboard vertically into the base. No screws or glue are required. Review printing the backboard flat on its rear face and inspect relief/support access.
Dimensions are in millimetres. Each STEP is an alternative CAD format for the matching STL, not an extra piece to print.
PRINT STATUS AND COLORS
Geometry, dimensions and part completeness were checked in CAD. This model has not been sliced or physically test-printed. Review orientation, supports and tolerances in your slicer. No tested print profile, print time or G-code is supplied.
The cover is a render of the actual model, not a photograph. STL and STEP contain uncolored geometry; illustrated colors require painting or slicer coloring. No AMS/MMU-ready multicolor 3MF is included. Food-contact performance has not been validated; use wrapped sweets if storing treats.
CREDITS AND LICENSE
Created for boxesmodel with AI-assisted parametric CAD development.
© 2026 boxesmodel. CC BY-NC-ND 4.0: https://creativecommons.org/licenses/by-nc-nd/4.0/
Personal noncommercial printing is permitted under the license. Credit boxesmodel with source and license links when sharing the original files. Do not distribute modified versions; the linked license contains the full terms.