CIMUKA Grid – Food Saver grid

CIMUKA Grid – Food Saver

Reduce feed waste and keep your quail feeder cleaner!

The CIMUKA Grid – Food Saver is a simple 3D-printable grid designed for quail feeders. It helps keep the feed inside the feeder while still allowing quails easy and comfortable access to the food.

The design is modular, so you are not limited to one fixed length. Each grid section is approximately 170 × 75 mm, and you can connect multiple sections using the printed connectors to create the exact length you need.

Key features

• Helps reduce feed waste caused by quails kicking feed out of the feeder

• Keeps the feeder area cleaner

• Easy access to feed for quails

• Modular design – make the feeder as short or as long as you need

• Multiple sections can be connected together

• Grid sections can be shortened to the required length using side cutters / flush cutters if necessary

• Designed for easy FDM 3D printing

Dimensions

• Grid section: 170 × 75 mm

• Standard assembly with 2 sections: approximately 340 mm

• Rod diameter: 4 mm

• Connector: approximately 75 mm wide

• Connector holes: 4.3 mm

• Connector insertion depth: approximately 10 mm

Printing recommendations

Material: PETG recommended, PLA also possible
Layer height: 0.20 mm
Walls / perimeters: 3
Infill: 15–30%
Supports: Not required
Print orientation: Flat on the print bed
Nozzle: 0.4 mm recommended

PETG is recommended for better durability, especially if the feeder will be used for a long time or exposed to higher temperatures.

Customize the length

One of the main advantages of this design is its modularity. Simply print as many grid sections and connectors as you need and assemble them together.

For a shorter feeder, the grid can also be cut down with side cutters/flush cutters to achieve the required length.

Print → Connect → Extend → Customize